3M™ Safety Film For Commercial

3M™ Safety Film For Commercial

Windows are among the weakest points in your building envelope. Should the glass break, the space can become unsafe for occupants and even significantly disrupt daily operations. Minimize injury to people and protect property from a range of safety concerns, including glass hazards and spontaneous glass breakage by installing 3M Safety Film on your existing glass panels.

The 3M Safety Film is a special transparent film sheet that is bonded to glass using strong 3M adhesives, thus reducing the possibility of injury or damage caused by flying glass shards. Combine with 3M™ Impact Protection Attachment Systems for additional safety and security.

Features & Benefits

    • Tear-resistant: 3M films stretch and do not tear
    • Tested and proven: 3M films meet requirements for the ANSI Z97.1 Standard with modifications for higher impact levels
    • 3M adhesives: Advanced 3M adhesives hold glass shards together in the event of breakage
    • Clear and thin: Films retain the appearance of the original glass and maintain a high level of optical clarity
    • Increases security and provides added protection against smash and grab burglaries.
    • Combine with 3M™ Impact Protection Attachment Systems for additional safety and security.

Photo Gallery

Frequently Asked Questions

Our 3M Safety Film uses a strong 3M adhesive to adhere the film to the glass, and is able to hold the glass together for up to 72 hours even after it breaks, giving you sufficient time to look for a replacement.

Laminated glass is a type of safety glass that holds together when shattered. Hence there is no urgent need to install 3M Safety Film on it unless you require additional anti-spall protection.

For glass surfaces with scratches, we can still install the safety film as the scratches do not affect the integrity of the glass. However, if you observe any cracks or chipped edges on the surface, that means the glass is already under stress. It is thus recommended to have the glass replaced for safety purposes.

Yes, we will need to remove any handles on your shower screen/doors first as the film needs to be applied on a flat glass surface.

The warranty period is for 3 years and covers any peeling and bubbling issues. For the warranty to be valid, the film must be installed for interior use only and away from direct contact with water. For example, for a shower screen film installation, the warranty will be valid only if the safety film is installed on the “dry” side of the glass.

The film adhesive will not bind well to a textured glass surface, hence we are unable to install 3M Safety Film on it. The safety film can only be installed on a flat glass surface. Please check with our sales consultant if you have further clarifications.

Contact Us For Your Free
On-Site Quote!